do88 Turbo Inlet for the GR Corolla 2023+

do88
SKU:
DO88-KIT218S
$354.11
(No reviews yet)
Current Stock:
Adding to cart… The item has been added

do88 Turbo Inlet Hose for the GR Corolla 2023+

Swap the restrictive factory inlet for a smoother, higher-flowing path to the turbo. The do88 Turbo Inlet Hose is a direct replacement for the stock inlet pipe on the GR Corolla's 1.6L turbo (G16E-GTS) engine. It's made in Sweden from 3D freeform silicone and comes with a CNC-machined aluminum turbo adapter.

Why upgrade your GR Corolla's turbo inlet? Anything restricting the air in front of the compressor makes the turbo work harder. do88 designed this hose to cut that restriction. It pairs well with a high-flow intake and tune, but it's a worthwhile upgrade for stock cars too.

Key features

  • Up to 15% more airflow: 710 CFM versus 620 CFM for the stock inlet, measured at 0.1 bar (1.45 psi) pressure drop (do88 flow-bench data)
  • Direct replacement: designed to bolt in where the factory inlet tube sits
  • Designed from a 3D scan of the car, then checked with CFD and do88's Superflow SF1020 flow bench
  • 3D freeform silicone hose in black
  • CNC-machined aluminum adapter for the turbo inlet
  • Everything in the box to complete the swap

What's included

  • do88 turbo inlet hose (black silicone)
  • CNC-machined aluminum adapter and aluminum joiner with O-ring
  • Aluminum crankcase and vacuum joiners
  • 80–100 mm and 50–70 mm hose clamps
  • 2 x M8x20mm countersunk screws
  • OEM-style ear clamps (15.7 mm and 31.6 mm)

Fitment Fits the 2023+ Toyota GR Corolla with the 1.6L turbo G16E-GTS engine. Also fits the 2020+ Toyota GR Yaris.

Installation Plan on a front lift, removing the right front wheel and wheel-well covers, and taking out the factory plastic inlet tube. Most DIYers with basic hand tools can handle it. [do88 install instructions (PDF)]

Frequently asked questions

Will this add horsepower? do88 says the increased airflow and lower restriction help the turbo work more efficiently. Gains vary by car, and it works best with other intake upgrades and a tune.

Is this a direct replacement? Yes. It replaces the stock inlet hose and uses the included adapters and clamps.

Do I need a tune? No tune is required to install it. It works on stock or tuned cars.

Does it fit the GR Yaris too? Yes. It's the same G16E-GTS engine, and the part was originally developed for the GR Yaris.

SKU: DO88-KIT218S | Brand: do88