Posted by By Rich, GR Performance Parts on 19th Nov 2026
Picking the Right ACT Clutch Kit for Your GR Corolla
Whether your GR Corolla is a daily driver with a few bolt-ons or a weekend track car making serious power, the stock clutch eventually becomes a question mark. ACT (Advanced Clutch Technology) now offers six clutch kits for the 2023-2026 Toyota GR Corolla, and they are not all built for the same job. Picking the wrong one can mean a clutch that chatters in traffic or one that slips when you need it to hold.
This guide breaks down every ACT GR Corolla clutch kit we carry, who each one is for, and how to choose between them. All six are 240mm kits (9.4 inches) built around ACT's Heavy Duty pressure plate, and ACT states they are SFI-approved.
The short answer
If you drive your GR Corolla on the street and want a clutch that still feels civilized, start with the ACT Heavy Duty Performance Street Sprung kit (TC9-HDSS). If you race the car, or you are making significantly more power than stock, look at the race kits below. If the car sees track days only and street manners do not matter, the rigid race kits are on the table.
ACT GR Corolla clutch kits at a glance
|
Kit |
Part number |
Disc type |
Torque capacity |
Best for |
|
Heavy Duty Performance Street Sprung |
TC9-HDSS |
Organic, sprung |
407 ft-lb |
Street and light track |
|
Heavy Duty Performance Street Rigid |
TC9-HDSD |
Organic, rigid |
407 ft-lb |
Street and race |
|
Heavy Duty Race Sprung 4 Pad |
TC9-HDG4 |
Ceramic, sprung |
619 ft-lb |
High-horsepower street or race |
|
Heavy Duty Race Sprung 6 Pad |
TC9-HDG6 |
Ceramic, sprung |
619 ft-lb |
High-horsepower street or race |
|
Heavy Duty Race Rigid 4 Pad |
TC9-HDR4 |
Ceramic, rigid |
619 ft-lb |
Race use only |
|
Heavy Duty Race Rigid 6 Pad |
TC9-HDR6 |
Ceramic, rigid |
619 ft-lb |
Race use only |
Torque capacity is measured at the engine. ACT rates the street kits at 20% over the factory clutch and the race kits at 82% over.
Street clutch kits for the GR Corolla
Both street kits use an organic friction disc with a high copper content for better heat transfer, plus a steel-backed lining for strength and durability. They are the right place to start if your car is driven on the road most of the time.
ACT Heavy Duty Performance Street Sprung (TC9-HDSS)
This is the kit for the owner who wants a more reliable clutch that can handle the extra power from bolt-ons, without giving up everyday drivability. ACT describes the feel as light to moderate pedal effort with smooth, positive engagement and OE to mild gear rattle. Of the six kits, it is the best option for street-ability while still holding up to spirited driving. At 407 ft-lb, it is rated 20% over the factory clutch.
It is a strong fit if your GR Corolla has an intake, downpipe, intercooler or a tune and you want the clutch to keep up, but the car is still your commuter.
ACT Heavy Duty Performance Street Rigid (TC9-HDSD)
This kit shares the same pressure plate and torque rating as the sprung version, but uses a solid-center (rigid) hub. That makes it a lightweight disc built for faster shifts. The tradeoff is more gear rattle, and ACT notes the rigid design may increase spline wear. It is recommended for both street and race use.
Choose the rigid street kit if you value a lighter, quicker-shifting disc and accept the noise that comes with a solid center.
Race clutch kits for the GR Corolla
The four race kits all use ceramic friction material and are rated at 619 ft-lb, which is 82% over the factory clutch. They are designed for high heat and high power. Expect aggressive engagement.
Sprung race kits: TC9-HDG4 and TC9-HDG6
These are the race kits that can still work on the street. The sprung center damps torsional vibration for quieter operation, with OE to mild gear rattle. ACT recommends them for high-horsepower street or race use. Our description of the 4 pad kit is that it suits an owner making significantly more power than stock who also races the car. It can be street-able, but it will be quite aggressive.
Rigid race kits: TC9-HDR4 and TC9-HDR6
These are built for the track. The solid-center design delivers faster shifting, but engagement is harsher, gear rattle is increased, and ACT recommends them for race use only. The 6 pad version will produce significant chatter and is not recommended for any sort of street use.
4 pad vs. 6 pad: what is the difference?
Both disc layouts are available in sprung and rigid form. ACT notes that the 6 pad disc is recommended for larger clutch sizes to absorb more heat, while the 4 pad disc is well suited to the smaller disc sizes in smaller engines. In practice, the right choice comes down to your use and your driving, so if you are unsure, ask us.
How to choose: a quick guide
- Mostly street, some spirited driving, light bolt-ons: TC9-HDSS, the Street Sprung kit.
- Street and occasional track, and you do not mind extra gear rattle: TC9-HDSD, the Street Rigid kit.
- Significantly more power than stock and you race the car, but it still sees the street: TC9-HDG4 or TC9-HDG6, the Race Sprung kits.
- Dedicated track or race car: TC9-HDR4 or TC9-HDR6, the Race Rigid kits.
What to expect after installing an ACT clutch
Pedal effort. ACT says to expect a pedal effort increase of 15-40% with its Heavy Duty clutches, depending on the application. That is the cost of a pressure plate designed for higher torque.
Break-in. For organic street discs, ACT recommends 300-500 miles of mild engagement, such as stop-and-go driving, before racing or spirited driving. Race discs typically need only a few hard slips to lap in the surfaces. Do not overheat the clutch during break-in.
Balance and warranty. ACT computer-balances every clutch assembly to within 0.25 oz-in, compared with about 0.50 oz-in for typical stock clutches. Each kit carries a 12-month warranty.
Pairing your clutch with a lightweight flywheel
Every ACT GR Corolla kit works with the original flywheel or with ACT's optional Streetlite flywheel (part 601510), which is sold separately. ACT's one-piece forged chromoly Streetlite flywheel weighs 16.8 lb, a 35.6% reduction in rotating weight versus the factory dual-mass flywheel. ACT says the lower mass is intended to allow quicker turbo spooling. We offer the ACT XACT Streetlite Clutch Flywheel for the GR Corolla 2023+ if you want to do both jobs at once while the transmission is out.
Fitment
These kits fit the 2023-2026 Toyota GR Corolla with the 1.6L turbo G16E-GTS engine, including Core, Premium, Premium Plus, Circuit and Morizo trims. ACT also lists them for the GR Yaris.
Shop ACT clutch kits for the GR Corolla
All six kits are in our ACT clutch kit category at GR Performance Parts, with free shipping on orders over $300 in the lower 48 states.
- ACT Heavy Duty Performance Street Sprung Clutch Kit (TC9-HDSS): https://www.grperformanceparts.com/act-heavy-duty-performance-street-sprung-clutch-kit-for-the-gr-corolla-2023/
- ACT Heavy Duty Performance Street Rigid Clutch Kit (TC9-HDSD): https://www.grperformanceparts.com/act-heavy-duty-performance-street-rigid-clutch-kit-for-the-gr-corolla-2023/
- ACT Heavy Duty Race Sprung 4 Pad Clutch Kit (TC9-HDG4): https://www.grperformanceparts.com/act-heavy-duty-race-sprung-4-pad-clutch-kit-for-the-gr-corolla-2023/
- ACT Heavy Duty Race Sprung 6 Pad Clutch Kit (TC9-HDG6): https://www.grperformanceparts.com/act-heavy-duty-race-sprung-6-pad-clutch-kit-for-the-gr-corolla-2023/
- ACT Heavy Duty Race Rigid 4 Pad Clutch Kit (TC9-HDR4): https://www.grperformanceparts.com/act-heavy-duty-race-rigid-4-pad-clutch-kit-for-the-gr-corolla-2023/
- ACT Heavy Duty Race Rigid 6 Pad Clutch Kit (TC9-HDR6): https://www.grperformanceparts.com/act-heavy-duty-race-rigid-6-pad-clutch-kit-for-the-gr-corolla-2023/
Not sure which kit fits your build? Email us at info@grperformanceparts.com and tell us about your car, your power level and how you use it.
Frequently asked questions
Which ACT clutch is best for a daily-driven GR Corolla? The Heavy Duty Performance Street Sprung kit (TC9-HDSS). It has the smoothest engagement and the least gear rattle of the six.
Can I use the stock flywheel with an ACT clutch kit? Yes. All six kits work with the OE flywheel or ACT's optional Streetlite flywheel.
Are ACT GR Corolla clutch kits SFI-approved? ACT states the new GR Corolla kits are SFI-approved.
Will an ACT clutch make my pedal heavier? Yes. ACT says to expect 15-40% more pedal effort with its Heavy Duty clutches.
What is the difference between sprung and rigid discs? A sprung disc has a spring center that damps vibration for quieter operation. A rigid disc has a solid center that shifts faster but produces more gear rattle.